Fridges

Our fridges are available with and without freezer units. Both options are built into the line of kitchen units, i.e. in the lower units or special high-level cupboards.

This option is available in a height of 82 cm and is built in under a continuous worktop. The air intake and outlet is via the plinth area.

Depending on the type of fridge, you can choose the following recess heights for a recess width of 56 cm: 177.5, 158, 140, 122.5, 102.5 and 88 cm.

To avoid unnecessary power consumption, there should be a gap of at least 200 cm² at the back and at the bottom of the fridge for ventilation.

Your fridge should be installed straight and the door must close properly. So make sure that the floor or cupboard is level.

If your recess is too small to meet your needs, replace your old built-in appliance with a free-standing one. You can use the cleared recess for additional storage or, for example, for a steam oven and warming drawer.

Integrated appliances are matched visually with the standard unit front made by your kitchen manufacturer. With appliances with a decor panel, a decor panel matching the unit fronts can be slipped into a panel frame or you can buy a stainless steel panel as an accessory.

Slider-type hinge

The unit front is fixed to the appliance door with a sliding connection.

All-in-one hinge

The unit front is permanently attached to the appliance door. This gives a wide opening angle and means that the hinge can take heavier loads.

All-in-one hinge with professional door buffer

A soft insert is added to the all-in-one hinge technology.

The slider-type hinge can be replaced with an all-in-one hinge when the appliance is changed.